Carbon Cartridges
ACTIVATED CARBON FILTER CARTRIDGE
SERIES GAC
DESIGN:
Filter element with granular activated carbon. Long contact time due to axial flow through the cartridge from bottom to top. Integrated post filter 5 micron.
APPLICATIONS:
For removal of undesired oil, fat, chlorine or other oraganic contents from drinking water, aceous liquids or gases. It is recommended to wash new cartridges for about 10 seconds for flushing out undesired activated carboon dust, especially when used in potable water.
TECHNICAL DATA:
Operating temperature: max. 50 °C
Type | Length | Diameter | Recommended max. Flow |
GAC-5 | 4 7/8" | 73 mm | 0,11 m³/h |
GAC-10 | 9 3/4" | 73 mm | 0,23 m³/h |
GAC-20 | 20" | 73 mm | 0,45 m³/h |
ACTIVATED CARBON FILTER CARTRIDGE
SERIES ECB
DESIGN:
Carbon block filter element in multiple retention rates for combined filtration and absorption applications.
APPLICATIONS:
The cartrdige provides a balance between chlorine absorbtion and high dirt holding capacity for a wide range of applications from potable and industrial water where the life of the carbon is never fully used. The cartridge is ideal for applications in the plating industry.
Type | Length | Nominal Retention Rate | Diameter | Recommended max. Flow |
ECB-1-10 | 9 3/4" | 1 micron | 70 mm | 0,22 m³/h |
ECB-5-10 | 9 3/4" | 5 micron | 70 mm | 0,22 m³/h |
ECB-10-10 | 9 3/4" | 10 micron | 70 mm | 0,22 m³/h |
ECB-1-20 | 20" | 1 micron | 70 mm | 0,45 m³/h |
ECB-5-20 | 20" | 5 micron | 70 mm | 0,45 m³/h |
ECB-10-20 | 20" | 10 micron | 70 mm | 0,45 m³/h |