Wound Cartridges - WMI

Go to content

Main menu:

Wound Cartridges

Filters

WOUND FILTER CARTRIDGE SERIES WP

DESIGN:
Good-value wound cartridge with center tube, providing a true depth filtration that becomes progressively smaller towards the center tube. Therefore larger particles are trapped in the outer zone and never reach the smaller inner openings. This depth filtration is resulting in high dirt holding capacity and longer service life for economical filtration. At the same time a high flow capacity at a low difference pressure is guaranteed.

APPLICATIONS:
Both the string and the inner tube are made of pure polypropylene, which is perfectly resistant against many aceous, alcaline or aqueous solutions as well as many organic liquids. Due to the good value the filter cartridges WP and WWP are mainly used for all standard filtration applications in water treatment plants and in the plating industry. When being used for drinking water or for food and drug applications, the WP filter elements shall be rinsed after installation
.


TECHNICAL DATA:

Diameter:                    Outer diameter 64 mm, inner diameter 27 mm

Length:                        5" to 40" (see table)

Flow capacity:              0,5-1,5 m³/h per filter element 10". For multiple

                                  long elements (20", 30", 40") the flow capacity

                                  is proportionally higher. Especially if there is high

                                  load of dirt, "oversizing" of filter elements for

                                  having low flow and low initial difference 

                                  pressure is recommended since this will 

                                  superproportionally increase the service life.

Difference pressure:     Recommended initial difference pressure < 0,15

                                  bar; Recommended replacement of filter

                                  cartridge at approx. 2 bar difference pressure.
Operating temperature: max. 65 °C
Retention rate:             5 to 200 micron (see table)

 
Nominal
Retention Rate
5" long10" long20" long30" long40" long
5 micronWP05P05WP05P10WP05P20WP05P30WP05P40
10 micronWP10P05WP10P10WP10P20WP10P30WP10P40
25 micronWP25P05WP25P10WP25P20WP25P30WP25P40
50 micronWP50P05WP50P10WP50P20WP50P30WP50P40
75 micronWP75P05WP75P10WP75P20WP75P30WP75P40
100 micronWP100P05WP100P10WP100P20WP100P30WP100P40
150 micronWP150P05WP150P10WP150P20WP150P30WP150P40
200 micronWP200P05WP200P10WP200P20WP200P30WP200P40
4 7/8" long9 7/8" long
WP5P4.8WP5P9.8
WP10P4.8WP10P9.8
WP25P4.8WP25P9.8
WP50P4.8WP50P9.8
WP75P4.8WP75P9.8
WP100P4.8WP100P9.8
WP150P4.8WP150P9.8
WP200P4.8 WP200P9.8

Minimum order for 5" and 10" long cartridges: 30 units
Minimum order for 20" to 30" long cartridges:  15 units
Minimum order for 40" long cartridges:  10 units



4 7/8" for filter chamber FA51-50

 
Back to content | Back to main menu